The purpose of this form is to collect the minimum information we need to quote. On line quote requests are given priority and are the fastest way of obtaining a formal fixed cost quote*. We aim to do this within 5 working days of receipt of the request to quote, in most cases you will also be contacted by an experienced Certification Engineer to clarify any minor points and ensure we are providing what you need. All applicants need to fill in customer and product information so we know who you are and what your equipment is, however, if you would like to start the project with a design review (recommended) simply tick the boxes in that section and you are done!
You can jump to the appropriate sections below (and jump back by clicking 'top') or simply scroll down.
If you would like an estimate please call Customer Services (+44 (0) 1244 541551 ) or e-mail cs@epsilon-ltd.com with your contact details for a call back, we try and issue estimates or not to exceed costs within 24 hours.
Hate forms? Feel free to call a real person....
If you would like Epsilon to get this information from you over the telephone, please call Customer Services (+44 (0) 1244 541551 ) or e-mail cs@epsilon-ltd.com with your contact details for a call back. You are also very welcome to visit Epsilon for a technical meeting, where in most cases we can provide a fairly accurate estimate or fixed cost during a meeting.
*For Machinery and ATEX Non-Electrical we will always start with a Design Review as until a full list of hazards have been identified it is difficult to establish the true scope of the project. It is also recommended that customers who do not have experience in designing to the Directives and Standards listed start with a Design Review. It is highly unlikely that products will pass quickly (if at all) through Certification if you have not designed them to the specifications of the Standard!
