Certification of a Torch according to EN50020:1977 or 50020:1994
ExNB/98/004/CS
ATEX
Ignition Risks, ESD
ExNB/98/006/DS
ATEX
Conformity to Type Notification format
ExNB/98/007/CS
ATEX
EN 50019
Internal contacts on zoned heating tapes
ExNB/98/010/CS
ATEX
EN 50018
Minimum requirement for thread engagement/NPT Cable entry holes in flameproof apparatus to EN 5018
ExNB/98/063/CS
ATEX
EN 50020
10.9
Tests for cells and batteries
ExNB/98/064/CS
ATEX
EN 50020
Rating of components related to associated apparatus with galvanic isolation (Ref HOTL (95)CESI/001)
ExNB/98/066/CS
ATEX
EN 50020
6.4.7 & 6.4.8
Verification of CTI for 'i'
ExNB/99/014/CS
ATEX
EN 50020
7.2 & 7.4
Voltage source of EEPROMS etc
ExNB/99/015/CS
ATEX
EN 50020
12.2
Eex ib'
ExNB/99/016/CS
ATEX
EN 50020
EN 50020 1997 & 1994 - Marking apparatus with alternative protection "d" or "i"
ExNB/99/017/CS
ATEX
EN 50020
6.4.6
Calculation of multiple separation distances
ExNB/99/018/CS
ATEX
EN 50020
6.4.1
Separation for insulated materials
ExNB/99/060/CS
ATEX
Plastic Parts on which the safety of "Flameproof" enclosures depend
ExNB/99/061/CS
ATEX
EN 50018
Are Flexible walls acceptable as part of flameproof enclosures?
ExNB/99/069/CS
ATEX
Gas analysis performed within a flameproof enclosure
ExNB/99/071/CS
ATEX
Assessment schedule - Clause 3.3 of Annex IV and Annex VII
ExNB/99/072/CS
ATEX
Assessment schedule for Annex IV, VI & VII - Various issues
ExNB/99/074/CS
ATEX
Impact Test on non metallic enclosures
ExNB/99/075/CS
ATEX
EN 50020
Marking of associated apparatus according to EN 50020
ExNB/99/082/CS
ATEX
Instructions & EC Type Examination
ExNB/99/086/CS
ATEX
Handling and storage of the dossier for non electrical equipment category M2 & 2 according to Annex VIII, paragraph 3.
ExNB/00/023/CS
ATEX
Recommendations on the measurement of temperature of light transmitting parts of products intended for use in potentially explosive atmospheres using thermocouples.
ExNB/00/024/CS
ATEX
EN 50020
6.5
Protection against polarity reversal
ExNB/00/025/CS
ATEX
Short Temperature Rise of Ex p motors during start up
ExNB/00/026/CS
ATEX
The standard wording of Article 11 of the EC-Type Examination Certificate shall be changed as follows.
ExNB/00/029/CS
ATEX
EN 50014
8
Light Alloys in Group 1 Apparatus
ExNB/00/031/CS
ATEX
EN 50018
5.2.3
Rectangular Spigot Joints
ExNB/00/033/CS
ATEX
EN 50028
4.1.2
Internal voids
ExNB/00/034/CS
ATEX
Ex Components - Indication of temperature class in the marking
